Power Up/Down Projection System in Classroom

Question

How do I power up/down the projection system in the classroom?

Answer

Helpful Tips:

  • Always power-down the projection system when you are finished using the equipment. 
  • Something not working? Our general troubleshooting guide for a projection system lists all the little things you should check before you panic. 
  • If you need immediate help, contact Classroom Technology Support at 419-372-9400. 

 

Power ON Projection System

  1. Locate the AV control panel — if the panel is dark, touch the center to wake. 
  2. Locate and press the POWER button on the control panel. 
  3. Wait for the system to power-up — this may take a few minutes 
  4. Once the system is on, select the input source you want to use. 
    • NOTE: projection system starts up with the classroom computer (PC/PC main) selected. 

 

Power OFF Projection System 

  1. If you used the classroom computer, log off or restart — do not shut down.
  2. Locate and press the System Off button on the control panel. 
  3. Confirm Power Off by pressing Power Down. 
  4. The projection system will begin a cool-down cycle — the projector should now be OFF. 
    • Warning: If the projector is still on during the cool-down cycle, this indicates a problem with the system. 
  5. Be sure to take any removable media (USB flash drive, CD, DVD, or Blu-ray discs, etc.) with you. 

For additional assistance, please contact Information Technology Services at 419-372-0999 or through chat.

Print Article