Body
Question
How do I power up/down the projection system in the classroom?
Answer
Expand the panels in this article for instructions how to power up/down the projection system in the classroom.
Helpful Tips:
- Always power-down the projection system when you are finished using the equipment.
- Something not working? Our general troubleshooting guide for a projection system lists all the little things you should check before you panic.
- If you need immediate help, contact Classroom Technology Support at 419-372-9400.
Power ON Projection System
- Locate the AV control panel — if the panel is dark, touch the center to wake.
- Locate and press the POWER button on the control panel.
- Wait for the system to power-up — this may take a few minutes
- Once the system is on, select the input source you want to use.
- NOTE: projection system starts up with the classroom computer (PC/PC main) selected.
Power OFF Projection System
- If you used the classroom computer, log off or restart — do not shut down.
- Locate and press the System Off button on the control panel.
- Confirm Power Off by pressing Power Down.
- The projection system will begin a cool-down cycle — the projector should now be OFF.
- Warning: If the projector is still on during the cool-down cycle, this indicates a problem with the system.
- Be sure to take any removable media (USB flash drive, CD, DVD, or Blu-ray discs, etc.) with you.
For additional assistance, please contact Information Technology Services at 419-372-0999 or through chat.