Using the Portable Classroom Document Camera

How do I use the portable classroom document camera?

Below is instructions on using the classroom document camera and for troubleshooting information.

Using the Portable Ladibug Document Camera 

1. With the projection system ON, select Doc Cam on the control panel.  
2. Press and hold the Power button to turn ON the document camera.  
3. Wait a few moments for the device to power ON and initialize. 
4. Adjust the gooseneck and lens to appropriate positions for your use. 
5. Press the AUTO TUNE button to auto focus and optimize the image. 
6. When you are finished using the equipment, power down the document camera by pressing and holding the power button. 

Document Camera Troubleshooting

1. Be sure that the document camera power cord is securely plugged in to the device. 
2. Try restarting the document camera — turn it OFF and then turn it ON again. 
3. Try re-seating/plugging the HDMI cable at the document camera. 
4. If these steps do not solve the issue, use the control panel to: 
   1. Switch to a different source, such as PC main. 
   2. Select the Doc Cam option to re-connect to the document camera .
   3. Select the Display Mute button, if no picture appears. 
5. If you continue to experience this issue, contact Classroom Technology Support at 419-372-9400 and provide the following information:
   1. Classroom location, including building name and room number. 
   2. Document camera type.

For additional assistance, please contact Information Technology Services at 419-372-0999 or through chat.